Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Sep 17, 2025～Oct 14, 2025
This ranking is based on the number of page views on our site.
1～15 item / All 25 items
Sending out with rollers without rubbing against the ground or cables.
Compatible with wires and cables up to an outer diameter of 38mm. Five rollers smoothly feed the cable. The lever operation allows for easy fixation of the main unit to a desk or similar surface. Removing the cable is also simple.
You can change setups without inserting the work from the front! A very convenient cross guide roller.
The "CRG type" is a very convenient cross guide roller that allows for setup changes without inserting the workpiece from the tip. You can remove the roller at the cutting edge to insert the workpiece. The roller material is SUJ2, and it has a hard chrome plating surface treatment. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
Do you have any troubles, such as work escaping? By turning the knob, the two guide rollers open and close simultaneously with center distribution.
The "SB type" is a guide roller that opens and closes simultaneously with two guide rollers through the rotation of a knob, distributing the center. It is convenient because it maintains the center even when the width of the work being guided changes. The roller material is SUJ2, and it has a surface treatment of hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
The main body is also equipped with long holes (N) for vertical adjustment, which further expands the adjustment range. *Dimension table available.
The adjustment of the product's width (d) is done by loosening the nut that tightens the bar roller with a wrench, guiding the roller to the work width within the range of the long hole on the main body where the vertical roller is attached, and then moving and securing it with the nut. Additionally, the main body is also equipped with a long hole (N) for vertical adjustment, further expanding the adjustment range. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
The adjustment of the upper horizontal roller is fixed using the butterfly nuts at both ends! *Dimension table available.
The "SH type and SHL type" are guide rollers used when the guided workpieces are prone to coming off. The adjustment of the upper horizontal roller is secured using the butterfly nuts located at both ends. The roller material is SUJ2, and the surface treatment is hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency hardening (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
The vertical roller operates by opening and closing when the lower handle is turned, based on the center.
The "ST type" is a guide roller that opens and closes by rotating the lower handle, with the vertical roller based on the center. The horizontal roller can be adjusted to any position both up and down. The upper part of the horizontal roller uses a butterfly nut. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
It can also be used in places where loads are applied and for first-stage processing of work!
The "KRP type" is a guide roller with brackets for dual support types. Since it is a dual support type, it can be used in places where loads are applied and for primary receiving of workpieces. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
![[Processing Example] Guide Roller Resin Processing](https://image.mono.ipros.com/public/product/image/ea7/2000542588/IPROS13775038076598514096.png?w=280&h=280)
We will introduce a case of machining guide rollers on a lathe!
We would like to introduce examples of guide roller processing. At Antak Co., Ltd., we utilize a network of partner factories to meet our customers' requests. We handle various materials including metal, resin, rubber, and ceramics. We also accommodate any type of processing. We accept urgent processing requests, so please feel free to contact us. 【Example】 ■ Processing Category: Resin Processing ■ Product Name: Guide Roller ■ Processing Details: Lathe Processing ■ Material: MC901 *For more details, please refer to the PDF document or feel free to contact us.
Leaves no marks on the floor and does not discolor! Polyurethane guide roller.
The "FTH 30×8/6-6K" is a polyurethane guide roller manufactured by Blickle, equipped with a tread. It operates quietly with low rolling resistance, offers excellent floor protection, and has very high abrasion resistance. It has strong resistance to cutting and tearing propagation, leaves no marks on the floor, does not discolor, and the tread is chemically bonded very securely to the ball bearings. 【Features】 ■ Quiet operation with low rolling resistance ■ Very high abrasion resistance ■ Sealed ball bearings ■ Pre-greased for long life ■ Excellent chemical resistance *For more details, please refer to the PDF document or feel free to contact us.
Klein Co., Ltd. is capable of manufacturing various high-precision guide rollers.
At Klein Co., Ltd., we are capable of manufacturing various high-precision guide rollers (aluminum, brass, SUS, SF20T, SF30V, Kanizen, DLC, and various surface treatments). Based on our extensive assembly experience with commercial and industrial equipment, we perform assemblies that require high precision. Additionally, we can accept comprehensive orders that include surface treatments by partner manufacturers. We also strive to streamline the parts procurement process for our customers by arranging parts in-house. 【Specifications】 ○ Material: Aluminum, Stainless Steel, Titanium ○ Lot: 1 to 1,000 pieces ○ Precision: --- For more details, please contact us.
No need for center adjustment: Just align with the position of the part to be processed, and the workpiece is guided while always maintaining the center. Significantly improves work efficiency!
The "CR Type Standard Type" is a cross guide roller that can be moved while always maintaining its center, simply by aligning it with the position of the processed parts. This product allows for the outer diameter of the moving parts (round bars, square bars) to change with each operation. By loosening the knob (clamp bolt) that secures the inner rail by hand and rotating the outer race while holding the knob, the four rollers open and close simultaneously towards the center. 【Usage example when moving to self-cutting (guiding)】 ■ When the outer diameter of the part being processed changes ■ When the outer diameter differs between the entry side and the exit side ■ Simultaneous centering during supply in testing machines, etc. ■ Electric wires, pipes, square materials, various rod shapes ■ Various applications for assembly, bundling, and more *For more details, please feel free to contact us. You can also view the drawing materials from the PDF download.
The standard type CR cross guide roller is lightweight and compact! It is suitable for places with no installation space and for conveying devices.
The "CRC type" is a lightweight and compact version of the standard CR type cross guide roller. It is suitable for areas with no installation space and for conveying devices. The roller material is SUJ2, and it has a surface treatment of hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency hardening （HRC 58° or higher / Effective hardening depth of 0.7mm or more） ■ Surface treatment: Hard chrome plating （Hardness HV 750 or higher / Thickness of 5μ or more） *For more details, please refer to the PDF document or feel free to contact us.
It's useful when there is no space in the direction of the work being guided!
The "CRB type" is a cross guide roller that is convenient when there is no installation space in the direction of the work being guided, as the mounting part is set below the cross guide roller. The roller material is SUJ2, and it has a surface treatment of hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
Ideal for situations where you need to change the center of the guide work in the width direction!
The "NB type" is a guide roller that allows for the independent movement of two vertical rollers due to the knobs set on both sides. It is convenient when you need to change the center of the workpiece in the width direction. The roller material is SUJ2, and the surface treatment is hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
By turning the knob, a single vertical roller operates as a guide roller!
The "TB type" is a guide roller that operates a single vertical roller by turning a knob. The range of motion is from 0 to (S+D). The roller material is SUJ2, and the surface treatment is hard chrome plating. 【Features】 ■ Roller material: SUJ2 ■ Hardness: High-frequency quenching (HRC 58° or higher / Effective hardening depth of 0.7mm or more) ■ Surface treatment: Hard chrome plating (Hardness HV 750 or higher / Thickness of 5μ or more) *For more details, please refer to the PDF document or feel free to contact us.
